Calculate

Building size

50×100 pole barn cost

A 50×100 pole barn is a 5,000 square foot building and typically sits in agricultural, equestrian, storage, or commercial programs rather than a residential garage. Height, door packages, and occupancy requirements often dominate the budget.

Key facts

Width
50 ft
Length
100 ft
Square feet
5,000 sq ft
Common heights
14 ft, 16 ft, 18 ft, 20 ft

Common uses: Storage, Agricultural, Equestrian, Commercial

Square footage is 50 × 100 = 5,000 sq ft, derived from the shared BuildingSize object.

No sourced 50×100 production price yet

BarnCost will not invent construction costs. This page uses shared building data for size, use, and configuration. Dollar estimates appear only after sourced CostComponents are loaded into the pricing catalog.

Needs data

  • DIY kit national $/sq ft assumptions by building class
  • Installed shell national $/sq ft assumptions
  • Turnkey / finished national $/sq ft assumptions
  • Erection labor national $/sq ft or crew-rate assumptions
  • Concrete 4-inch installed cost range
  • Concrete 6-inch installed cost range
  • Roof-only insulation cost range
  • Full-building insulation cost range

Missing sourced pricing

These selected items have no valid CostComponent for the requested geography or fallback levels. BarnCost does not invent a substitute price.

  • Building shellNo valid pricing component available for building_shell at the requested geography or fallback levels.
  • Installation / laborNo valid pricing component available for erection_labor at the requested geography or fallback levels.
  • Overhead doorsNo valid pricing component available for overhead_doors at the requested geography or fallback levels.
  • Entry doorsNo valid pricing component available for entry_doors at the requested geography or fallback levels.
  • Concrete · concrete 4 inchNo valid pricing component available for concrete (concrete_4_inch) at the requested geography or fallback levels.
  • Site preparationNo valid pricing component available for site_prep at the requested geography or fallback levels.
  • Permits / allowancesNo valid pricing component available for permits at the requested geography or fallback levels.

Configure this size

The calculator starts from this footprint and the selected building use.

Example configurations

UseScopeSlabInsulationElectrical
Equipment / general storageInstalled shell4-inchnonenone
Agricultural buildingInstalled shellNonenonenone
EquestrianInstalled shell4-inchnonebasic

Cost drivers

  • Scope: kit vs installed shell vs turnkey
  • Openings: overhead doors dominate many garage and shop jobs
  • Interior program: insulation and electrical for workshops
  • Site access and pad preparation

Concrete impact

A 50×100 slab covers 5,000 sq ft. Choosing none, 4-inch, or 6-inch changes quantity and unit cost independently of the shell. Concrete cost guide

Height impact

Common eave heights for this size are 14 ft, 16 ft, 18 ft, 20 ft. BarnCost records height on the configuration. A numeric height multiplier is applied only after that adjustment is documented.

Doors, insulation, and use

Building-use defaults change openings and finish options. A 50×100 garage is not the same specification as a 50×100 agricultural building.

Related building sizes

Methodology

This page reads width, length, square feet, heights, uses, and related sizes from the canonical BuildingSize record. It does not duplicate those facts as one-off copy. How BarnCost estimates cost

Construction pricing varies by location, builder, site conditions, material markets and project specifications. BarnCost provides estimated ranges rather than claiming to provide an exact contractor quote. Read the methodology.

FAQ

How many square feet is a 50×100 pole barn?
5,000 square feet, derived from 50 × 100.
Is a 50×100 usually a kit or a finished building?
Either, but they are different products. A kit price is not a completed 50×100 project. Choose DIY kit, installed shell, or turnkey in the calculator so the scopes stay separate.